|
| View previous topic :: View next topic |
| Author |
Message |
Brian
Guest
|
 Posted: Sat Nov 17, 2007 11:26 pm Post subject: XP Pro Repair Installation |
 |
|
Don't tell me here that clean installation works better, please.
Okay. I know how to do I repair installation, but some things have just
gotten messed up.
I have a SP1a XP Pro disk from Dell. I was trying to perform a repair
installation, and I got the message "The file 'asms' is needed..." I found
something about it in the knowledge base (KB) about deleting registry keys
because the computer cannot communicate with the cd drive, but it wasn't
sufficient. I asked about it here, and I was told that I needed to slipstream
SP2 into my disk. I had some complications. I asked about them here as well.
I had to delete svpack.dl_, svpack.inf, a .cat file, and a .cab file. I also
needed to delete the svcpack directory, but it was not present on my cd.
I used NLite to create and burn an iso image to a DVD+R. I inserted it into
my DVD drive, and it blinks for almost 15 seconds. After waiting for that, I
tried to boot from it and it told me something about memory overload when
trying to boot from it, after I press a key to boot from cd. Then it booted
to my C: drive, and it restarted my installation.
But this is still my SP1 repair installation setup, and it asks me to insert
the Service pack 1 cd. I keep the SP2 cd in there, and then I get the 'asms'
error again. The next time I try to boot to the DVD-R, it fails.
Give me answers to all of these problems, please. Thank you in advance. |
|
| Back to top |
|
 |
Google
Sponsor
|
| Posted: Sat Nov 17, 2007 11:26 pm Post subject: Advertisement |
|
|
|
|
| Back to top |
|
|
Shenan Stanley
Guest
|
| Posted: Sun Nov 18, 2007 1:36 am Post subject: Re: XP Pro Repair Installation |
|
|
Brian wrote:
| Quote: | Don't tell me here that clean installation works better, please.
Okay. I know how to do I repair installation, but some things have
just gotten messed up.
I have a SP1a XP Pro disk from Dell. I was trying to perform a
repair installation, and I got the message "The file 'asms' is
needed..." I found something about it in the knowledge base (KB)
about deleting registry keys because the computer cannot
communicate with the cd drive, but it wasn't sufficient. I asked
about it here, and I was told that I needed to slipstream SP2 into
my disk. I had some complications. I asked about them here as well.
I had to delete svpack.dl_, svpack.inf, a .cat file, and a .cab
file. I also needed to delete the svcpack directory, but it was not
present on my cd.
I used NLite to create and burn an iso image to a DVD+R. I inserted
it into my DVD drive, and it blinks for almost 15 seconds. After
waiting for that, I tried to boot from it and it told me something
about memory overload when trying to boot from it, after I press a
key to boot from cd. Then it booted to my C: drive, and it
restarted my installation.
But this is still my SP1 repair installation setup, and it asks me
to insert the Service pack 1 cd. I keep the SP2 cd in there, and
then I get the 'asms' error again. The next time I try to boot to
the DVD-R, it fails.
Give me answers to all of these problems, please. Thank you in
advance.
|
My actual advice:
Take it to someone who can repair your computer. You have reached a point
that helping you remotely is risky, at best (for you.)
Also - you may not want to hear it - but compare the amount of time you have
spent trying to do a repair install with how much time you would have spent
doing a clean install and getting things back up to a usable state. Worried
about data? If you know how to do a repair install, then making a BartPE CD
and booting from it and copying your data off or making an image of the
entire machine should be easy for you.
Stuff that may help you above the actual advice:
Unless you integrated many more things than SP2 - you have no need to make a
DVD. Stick with CDs. Do not complicate things anymore than you have to.
Burning a CD as opposed to a DVD (altough technically it should make no
difference) may remedy your problem.
Don't use NLite to make your CD. Copy your files, download the entire SP2,
integrate it the old fashion way, burn your new CD the old fashion way.
--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html |
|
| Back to top |
|
|
peter
Guest
|
| Posted: Sun Nov 18, 2007 3:52 pm Post subject: Re: XP Pro Repair Installation |
|
|
The easiest Slipstreaming tool I have ever used and it works 100% of the
time....on CD's
http://www.softpedia.com/get/Tweak/System-Tweak/Autostreamer.shtml
peter
"Brian" <Brian@discussions.microsoft.com> wrote in message
news:1C7BC9E6-F058-4638-B68E-092115DE013E@microsoft.com...
| Quote: | Don't tell me here that clean installation works better, please.
Okay. I know how to do I repair installation, but some things have just
gotten messed up.
I have a SP1a XP Pro disk from Dell. I was trying to perform a repair
installation, and I got the message "The file 'asms' is needed..." I found
something about it in the knowledge base (KB) about deleting registry keys
because the computer cannot communicate with the cd drive, but it wasn't
sufficient. I asked about it here, and I was told that I needed to
slipstream
SP2 into my disk. I had some complications. I asked about them here as
well.
I had to delete svpack.dl_, svpack.inf, a .cat file, and a .cab file. I
also
needed to delete the svcpack directory, but it was not present on my cd.
I used NLite to create and burn an iso image to a DVD+R. I inserted it
into
my DVD drive, and it blinks for almost 15 seconds. After waiting for that,
I
tried to boot from it and it told me something about memory overload when
trying to boot from it, after I press a key to boot from cd. Then it
booted
to my C: drive, and it restarted my installation.
But this is still my SP1 repair installation setup, and it asks me to
insert
the Service pack 1 cd. I keep the SP2 cd in there, and then I get the
'asms'
error again. The next time I try to boot to the DVD-R, it fails.
Give me answers to all of these problems, please. Thank you in advance. |
|
|
| Back to top |
|
|
chigbie
Guest
|
| Posted: Tue Nov 27, 2007 6:08 pm Post subject: Re: XP Pro Repair Installation |
|
|
Took me a while - I had the same problem and was using a CD with SP2
already applied. Found out the problem is caused when install quits
seeing the CDROM drive. The solution is here
'\"The file 'Asms' on Windows XP Professional CD-ROM is needed\" error
message when you install Windows XP'
(http://support.microsoft.com/?kbid=311755)
The only thing is that when that was done - I had to go back and give
System and Administrators (plural) full access rights to the drive for
the paging file.
But other than that it worked like a champ.
Carrie |
|
| Back to top |
|
|
Brian
Guest
|
| Posted: Sat Dec 01, 2007 2:50 am Post subject: Re: XP Pro Repair Installation |
|
|
Well... It didn't work for me. I deleted the registry keys but it still
doesn't work.
"chigbie" wrote:
| Quote: |
Took me a while - I had the same problem and was using a CD with SP2
already applied. Found out the problem is caused when install quits
seeing the CDROM drive. The solution is here
'\"The file 'Asms' on Windows XP Professional CD-ROM is needed\" error
message when you install Windows XP'
(http://support.microsoft.com/?kbid=311755)
The only thing is that when that was done - I had to go back and give
System and Administrators (plural) full access rights to the drive for
the paging file.
But other than that it worked like a champ.
Carrie
|
|
|
| Back to top |
|
|
Lchmst
Guest
|
| Posted: Fri Dec 21, 2007 5:29 pm Post subject: Re: XP Pro Repair Installation |
|
|
I am attempting to slipstream XP Raid drivers.......the Slipstreaming worked
fine with integration into winxp professional. However upon installation,
the drives partitions are still not properly formatted. The drive is damaged
with bad sectors, and I am ready to replace it, however I would like to
perform at least one successful install before installing the new drive. Can
anyone make any suggestions
"Brian" wrote:
| Quote: | Well... It didn't work for me. I deleted the registry keys but it still
doesn't work.
"chigbie" wrote:
Took me a while - I had the same problem and was using a CD with SP2
already applied. Found out the problem is caused when install quits
seeing the CDROM drive. The solution is here
'\"The file 'Asms' on Windows XP Professional CD-ROM is needed\" error
message when you install Windows XP'
(http://support.microsoft.com/?kbid=311755)
The only thing is that when that was done - I had to go back and give
System and Administrators (plural) full access rights to the drive for
the paging file.
But other than that it worked like a champ.
Carrie
|
|
|
| Back to top |
|
|
Shenan Stanley
Guest
|
| Posted: Fri Dec 21, 2007 5:35 pm Post subject: Re: XP Pro Repair Installation |
|
|
Lchmst wrote:
| Quote: | I am attempting to slipstream XP Raid drivers.......the
Slipstreaming worked fine with integration into winxp professional.
However upon installation, the drives partitions are still not
properly formatted. The drive is damaged with bad sectors, and I
am ready to replace it, however I would like to perform at least
one successful install before installing the new drive. Can anyone
make any suggestions
|
If the drive is 'damaged' - it may be impossible to have a successful
*anything* with it involved. I do not understand your hesitance in
replacing and performing a clean installation on the new drive <-- in any
case the bad drive has to be replaced, correct?
--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
